Fast, Reliable Duct Repair & Sealing Across Everett
Duct repair and sealing in Everett typically costs $280-$650 for most residential jobs, with same-day service available when you call before noon. We’re Bellows Air Duct & Vent Co., and we’ve been driving up to Everett from our Seattle shop for over 42 years to fix ductwork that fails differently here than anywhere else in Snohomish County. Call (833) 700-5198 for a free estimate - we’ll give you the honest price before we lift a single tool.
Everett sits on Port Gardner Bay, and that salt-laden marine air doesn’t just rust your car. It gets pulled through every gap in your ductwork, corrodes sheet metal from the inside out, and keeps humidity high enough that mold keeps growing even when your furnace isn’t running. We’ve learned what fails here, and what fixes actually last.
Why Bellows Air Duct & Vent Co. of Seattle Is Everett’s Preferred Duct Repair & Sealing Company
We’ve built our reputation in Everett one job at a time, mostly by word of mouth from homeowners who’ve lived in the same house for twenty or thirty years and don’t want to think about their ducts again. Our Duct Repair & Sealing in Everett work is backed by the 90-Day Done Right Promise - if it’s not right, we come back at no charge, no paperwork, no arguing. That’s been our policy since 2012.
Calls to our office are answered by a live person, 24 hours a day. Not a voicemail tree, not an app. When an Everett homeowner calls at 6 p.m. because they can smell mold every time the heat kicks on, someone picks up and schedules a technician.
Our technicians are background-checked and uniformed, and they arrive with professional-grade equipment from Rotobrush, Abatement Technologies, and Aprilaire - the same brands serious HVAC contractors specify, not discount hardware-store gear. Most jobs are completed in a single visit because we stock parts for Everett’s common duct configurations, from 1950s gravity-furnace retrofits to 1990s flex-duct tract homes.
We know the difference between a 98201 craftsman near Grand Avenue with original plaster and a 98208 rambler off 128th Street SE with builder-grade flex runs. That local knowledge means we diagnose faster and fix it right.
Our Duct Repair & Sealing Services in Everett
Duct Sealing
Sealing is the foundation of everything we do in Everett, but standard tape-and-go sealing fails here. The marine air finds every gap, and humidity keeps the metal wet enough that adhesives degrade. We use mastic sealant on every joint - brushed on thick, cured properly, and camera-verified before we leave. In 98201 and 98203 ZIP codes, we regularly find gravity-furnace retrofits with trunk lines that have never been properly sealed; the original installers just butted sheet metal together and hoped for the best. Those half-inch gaps pull in crawlspace air year-round. We seal them permanently.
Mastic Sealant
Mastic is the only sealant we trust for Everett’s climate. Tape fails. Aerosol sealants miss the big gaps. We brush on fiber-reinforced mastic at every joint, every penetration, every damper connection. In bay-facing homes near Port Gardner, we see backward-sealed mastic joints from previous repairs that actually trapped moisture inside the duct wall, accelerating corrosion. We remove that bad work and do it right - mastic on the exterior, proper curing time, no shortcuts. The result is a seal that holds against salt air and seasonal humidity swings.
Flex Duct Repair
Flex duct in Everett’s east ZIP codes - 98208 especially - was installed fast and cheap during the 1980s and 1990s building boom. It sags at hangers, pools condensate during the October-April rainy season, and traps debris. We don’t just patch the torn section. We evaluate the full run, replace sagging portions with properly supported new flex, and seal every connection with mastic. In homes downwind of Paine Field, we also inspect for the fine gray-black particulate that clogs these flexible lines faster than standard household dust.
Metal Duct Repair
Everett’s 1940s-1960s homes have sheet metal that has been cycling salt air for 60-80 years. Corrosion eats through trunk lines, especially at joints and where ducts pass through unconditioned crawlspaces. We cut out rotted sections, fabricate replacement pieces from galvanized steel, and seal with mastic. For severely corroded systems, we’ll show you the camera footage and give you an honest assessment - repair what’s worth repairing, replace what isn’t.
Duct Insulation
Uninsulated or degraded duct insulation in Everett is a mold incubator. The combination of cold crawlspace air and warm conditioned air creates condensation on the duct exterior, and the insulation soaks it up like a sponge. We replace waterlogged insulation with proper vapor-barrier-wrapped material, sealed at every seam, so moisture stays out and your conditioned air stays in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We stock parts and equipment from Rotobrush, Abatement Technologies, and Aprilaire - brands that HVAC professionals specify, not the discount lines that fail in Everett’s demanding conditions. Our technicians carry common flex duct sizes, mastic, galvanized repair sections, and proper insulation on every truck. That means most Everett jobs are done in one visit, not two. We don’t make you wait while we order parts from a warehouse in Tacoma.
Common Duct Repair & Sealing Problems We See in Everett Homes
- Corroded sheet-metal trunk lines in 1940s-’60s homes near the bay let humid crawlspace air infiltrate year-round, breeding mold even when the HVAC is off. The salt air accelerates rust at every joint, and gravity-furnace retrofits often left undersized trunks with no proper sealing at all.
- Flex duct installed during 1980s-2000s tract builds in east ZIPs sags at hangers, pools condensate during the October-April rainy season, and traps fine aerospace dust from Paine Field operations. The particulate is visually distinct - gray-black, fine as talc - and it clogs flex duct faster than standard household dust.
- Backward-sealed mastic joints in 98201 and 98203 trap moisture inside the duct wall, accelerating corrosion and microbial growth that standard repair alone can’t fix. Previous handymen or DIY attempts often created this problem by applying sealant to the interior surface where it can’t dry properly.
- Undersized flex runs from gravity-furnace retrofits can’t move enough air for modern heat pumps, causing high static pressure, duct noise, and premature equipment failure. We resize and replace these runs with properly calculated flex or hard duct.
Pricing for Duct Repair & Sealing in Everett, WA
Here’s what duct repair and sealing costs in Everett’s current market:
| Service | Typical Range |
|---|---|
| Basic duct sealing (mastic, up to 10 joints) | $280-$420 |
| Flex duct repair/replacement (single run) | $340-$580 |
| Metal duct repair (section replacement) | $450-$720 |
| Full trunk line sealing with access door installation | $580-$920 |
| Duct insulation replacement | $380-$650 |
Factors that move the price: accessibility (crawlspace vs. basement), extent of corrosion damage, whether mold remediation is needed before sealing, and whether we need to fabricate custom metal sections. We show you the camera footage, explain what we found, and give you the full price before we start. The number on the phone is the number on the invoice. We also offer $50 off any repair over $250, and a free second opinion on any written estimate you’ve already received.
We Also Serve Cities Near Everett
Our Duct Repair & Sealing team covers the full Snohomish County area, including Eastmont, Mukilteo, Mill Creek, and Silver Firs. Same-day service extends to these communities when scheduling allows. Call (833) 700-5198 to check availability for your address.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Everett
Everett’s direct exposure to Port Gardner Bay means salt-laden marine air penetrates ductwork year-round, while Marysville sits inland with measurably lower humidity and no salt spray. The difference is real - we see active corrosion in Everett ducts that are 10-15 years newer than Marysville systems showing the same damage. If you’re in 98201, 98203, or 98208, your ducts are fighting harder conditions than inland Snohomish County. Call (833) 700-5198 and we’ll show you what your system looks like inside.
Duct sealing alone won’t fix active mold - it stops the moisture infiltration that feeds mold, but existing colonies need to be addressed first. In 98201 and 98203 ZIP codes, we regularly find gravity-furnace retrofits with decades of microbial growth behind the corrosion. We clean and treat the duct interior, then seal properly so it doesn’t return. Our camera inspection shows you the before and after. Call for a free estimate - we’ll give you the honest scope, not a quick seal-and-run.
Yes, we can replace a single sagging section, but we always inspect the full run because sagging usually indicates systemic support failure. In 98208 tract homes, we find multiple sag points caused by original installers using too few hangers or the wrong type. We’ll replace the damaged section, add proper supports, and seal every connection with mastic. Most 98208 flex duct jobs run $340-$580. Call (833) 700-5198 for an exact quote - estimates are free.
In 98204 and 98208, the fine gray-black particulate we pull from ducts is a composite of household dust and ambient aerospace manufacturing fallout from Paine Field - visually and texturally distinct from standard dust even a few miles south in Lynnwood. It’s not hazardous at the concentrations we see, but it clogs ducts faster and reduces airflow. We remove it with proper agitation and vacuum, then seal the system to minimize future infiltration. Camera footage confirms what you’re breathing.
We recommend inspection every 3-4 years for Everett homes, more frequently if you have 1940s-1960s sheet metal or live within a mile of the bay. The salt air and persistent humidity accelerate corrosion and mold growth beyond what inland systems experience. Our $89 Seasonal Tune-Up includes a camera inspection of accessible ductwork - a small investment that catches problems before they become expensive repairs. Call (833) 700-5198 to schedule.
On a 1950s craftsman in the 98201 ZIP off Grand Avenue, we found the gravity-furnace retrofitted trunk line had a half-inch gap at every joint from corrosion, pulling in humid crawlspace air. We sealed those joints with mastic, installed a stainless steel access door, and replaced two sagging flex runs that were pooling condensate - the homeowner’s sinus issues cleared within a week.
Everett ductwork fails uniquely because its 1940s-1960s homes near Port Gardner Bay cycle salt-laden marine air through undersized retrofitted sheet metal, causing active mold and microbiological growth that standard sealing kits can’t handle. We’ve learned to diagnose this pattern, treat it properly, and seal it so it stays fixed. This isn’t generic duct advice - it’s what we’ve learned from four decades of working in Everett’s specific conditions.
Ready to get your ducts fixed right? Call Bellows Air Duct & Vent Co. at (833) 700-5198 for a free estimate. We’ll show you the camera footage, give you one honest price before we start, and back our work with the 90-Day Done Right Promise - in writing, no arguing, the way we’ve done it since 2012.
Written by Colin Merritt, Owner at Bellows Air Duct & Vent Co., serving Everett since 2012.